# Metal Building Erection Labor Cost per Sq Ft (2026) **URL:** https://utsbuildpros.com/blog/metal-building-erection-labor-cost-per-square-foot **Summary:** 2026 guides put metal building erection at $5–$10, $6–$12 and $5–$15 per sq ft. What it covers, cost by size, Texas ironworker wages, price drivers. **Overview:** Published 2026 guides put metal building erection labor at about $5-$10 per square foot (BuildingsGuide, October 2026), $6-$12 for standard structures (Terrapin Construction Group, April 2026) and $5-$15 (Worldwide Steel Buildings, April 2026). Erection covers standing the frame and installing panels on a finished foundation; it excludes the package ($14-$25/sq ft) and foundation ($4-$10). At $5-$10 a 30x40 is about $6,000-$12,000 to erect, a 40x60 $12,000-$24,000 and a 50x100 $25,000-$50,000. BLS May 2025 data put the Texas mean wage for structural iron and steel workers at $27.28 an hour. Written by Preconstruction Manager Jessica Zaleski. --- Metal Buildings 7 min read Published 2026-10-09 # Metal Building Erection Labor Cost per Square Foot in Texas (2026) Part of our [Metal Buildings guide](https://utsbuildpros.com/services/metal-buildings). [Jessica Zaleski](https://utsbuildpros.com/about#jessica-zaleski) Preconstruction Manager , UTS BuildPros [jzaleski@utsbuildpros.com](mailto:jzaleski@utsbuildpros.com) Share In This Article - What "Erection" Covers, and What It Does Not - The Published 2026 Ranges, Side by Side - What Erection Labor Comes to by Building Size - What Texas Ironworkers Earn - What Moves the Erection Price - How Long Erection Takes - Getting a Comparable Erection Price - Sources Short answer: published 2026 guides put the labor to erect a pre-engineered metal building at about $5–$10 per square foot (BuildingsGuide, October 2026), $6–$12 for standard structures (Terrapin Construction Group, April 2026) and $5–$15 (Worldwide Steel Buildings, April 2026). That covers standing the frame and hanging the roof and wall panels on a finished foundation. It does not include the steel package, the foundation, site work, doors beyond the basics, insulation or anything inside the building. Ready to build? Get a quote from our metal building team [Metal Building Services](https://utsbuildpros.com/services/metal-buildings)[Request a Quote](https://utsbuildpros.com/quote) ## What "Erection" Covers, and What It Does Not Erection is the field labor and equipment to assemble the building the manufacturer shipped: setting columns on the anchor bolts, raising the rafters, installing purlins, girts and bracing, plumbing and squaring the frame, then installing roof and wall panels, trim and the openings framed into the design. Equipment such as lifts and a crane is part of the job, and some erectors price it separately. It does not include the building package itself, which BuildingsGuide puts at $15–$25 per square foot for a 10-foot eave and Terrapin at $14–$22. It does not include the foundation: BuildingsGuide allows $4–$8 per square foot for a slab and Terrapin $4–$10 depending on soil. Read every erection quote for what is excluded, especially equipment, insulation installation, overhead doors and trim around openings. ## The Published 2026 Ranges, Side by Side BuildingsGuide: $5–$10 per sq ft. "As a guide, you should allow $5 to $10 per square foot for construction," on its metal building prices page, last updated October 2026. BuildingsGuide matches buyers with suppliers. Terrapin Construction Group: $6–$12 per sq ft. "Erection labor runs $6 to $12 per square foot for standard structures in 2026" (April 2026). Terrapin is a design-build contractor. Worldwide Steel Buildings: $5–$15 per sq ft. From its April 2026 guide to the cost of erecting a metal building. Worldwide Steel Buildings manufactures and sells buildings. All three sell buildings or construction or are paid by those who do, and none is Texas-specific. Read them as published ranges, not benchmarks. The overlap, roughly $6 to $10 per square foot, is where a standard building on a ready slab tends to sit; the spread around it is the site, the building and the market. ## What Erection Labor Comes to by Building Size Applying BuildingsGuide s $5–$10 range: a 30x40 (1,200 sq ft) is about $6,000–$12,000 to erect, a 40x60 (2,400 sq ft) about $12,000–$24,000, and a 50x100 (5,000 sq ft) about $25,000–$50,000. At Terrapin s $6–$12 the same three are $7,200–$14,400, $14,400–$28,800 and $30,000–$60,000. That is arithmetic on published ranges, not a quote. For the 30x40, our own planning matches: in UTS BuildPros planning ranges as of October 2026, delivery and erection labor for a 30x40 in Texas runs about $6,000–$12,000. The rest of that building's cost is broken out line by line in our [Texas metal building cost guide](https://utsbuildpros.com/blog/how-much-does-a-metal-building-cost-in-texas#kit-breakdown), and the full kit, shell and finished figures for each size are in [what a 30x40, 40x60 and 50x100 costs](https://utsbuildpros.com/blog/metal-building-cost-30x40-40x60-50x100-texas). ## What Texas Ironworkers Earn Erection is ironworker labor, and the Bureau of Labor Statistics publishes wages for it. In the May 2025 Occupational Employment and Wage Statistics, structural iron and steel workers in Texas earned a mean of $27.28 an hour ($56,740 a year) and a median of $25.12, with about 9,700 employed in the state. The national mean was $33.79 an hour. Those are wages, not a contractor s billing rate: an erector s price also carries payroll taxes, workers compensation, insurance, equipment, travel, supervision and margin. The wage gap is one reason national per-square-foot guides should be read with care in Texas. BuildingsGuide notes that "labor rates can fluctuate by as much as 60% depending on where in the country you intend to build." ## What Moves the Erection Price Size. Mobilization, equipment delivery and setup cost about the same for a small building as a large one, so small buildings land toward the top of each range per square foot. Height and span. Taller eaves and wider clear spans mean heavier members, bigger lifts or a crane, and more time at height. Openings and accessories. Every framed opening, overhead door, canopy, mezzanine or lean-to adds labor beyond the basic shell. Panel system. Standing seam roof systems take more installation care than through-fastened panels, and manufacturers set installation requirements for their weathertightness warranties. Site access and distance. A tight urban lot, soft ground after rain or a remote site hours from the erector s yard all add time and travel. A slab that is out of level or anchor bolts set off the drawings cost more than any line on the quote, because the frame cannot go up until they are fixed. Wind and weather. Panels and long members cannot be lifted safely in high wind, and Texas summer heat shortens productive hours. ## How Long Erection Takes Erection itself is usually the short part of the schedule. BuildingsGuide says a 40x60 "can be erected in 2 to 3 days" and that larger commercial projects "typically take 2 to 4 weeks," within an overall 6- to 12-week timeline that includes fabrication. Permits, engineering, steel lead time and the foundation usually take longer than putting the building up. ## Getting a Comparable Erection Price Ask each erector or contractor to price the same drawings and say, in writing, whether the price includes equipment, unloading, insulation installation, door and window installation, trim, cleanup and permits, and what happens if the slab or anchor bolts are out of tolerance. A low per-square-foot number with those items excluded is not a low price. UTS BuildPros manages metal building projects from foundation through erection and finish across Texas, Oklahoma and Arkansas, with erection done by qualified steel erectors under our supervision. Our Division President holds MBCI's Standing Seam Roof installation certification. See our [metal building services](https://utsbuildpros.com/services/metal-buildings), or call (940) 231-2640 or [request a quote](https://utsbuildpros.com/quote) for a line-item price. ## Sources BuildingsGuide, [Metal Building Prices](https://www.buildingsguide.com/metal-building-prices/), last updated October 2026 (construction $5–$10/sq ft, foundation $4–$8, regional labor variation). BuildingsGuide, [Pre-Engineered Metal Building](https://www.buildingsguide.com/build/pre-engineered-metal-building/), last updated October 2026 (package price, erection time). Terrapin Construction Group, [Pre-Engineered Metal Building Cost per Square Foot](https://terrapincg.com/news/pre-engineered-metal-building-cost-per-square-foot-usa), April 2026 (erection $6–$12/sq ft, package, foundation). Worldwide Steel Buildings, [Cost to Erect a Metal Building](https://www.worldwidesteelbuildings.com/blog/cost-to-erect-a-metal-building/), April 2026 (installation $5–$15/sq ft). U.S. Bureau of Labor Statistics, [Occupational Employment and Wages, Structural Iron and Steel Workers (47-2221)](https://www.bls.gov/oes/current/oes472221.htm), May 2025 estimates for Texas and the U.S. UTS BuildPros planning ranges for a 30x40 in Texas, October 2026, from our [Texas cost guide](https://utsbuildpros.com/blog/how-much-does-a-metal-building-cost-in-texas). Related Service Interested in metal building construction ? Learn more about how UTS BuildPros can help. [Explore Metal Building Construction](https://utsbuildpros.com/services/metal-buildings) ### Ready to Start Your Project? Get a free consultation and detailed estimate from our veteran-owned construction team. [Request a Quote](https://utsbuildpros.com/contact)[Call (940) 231-2640](tel:+19402312640) [Previous Article What a 30x40, 40x60 and 50x100 Metal Building Costs in Texas (2026)](https://utsbuildpros.com/blog/metal-building-cost-30x40-40x60-50x100-texas)[Next Article Certified Steel Building Contractors in Texas: What MBCI SSR, NASCLA, PMP and ISNetworld Actually Mean](https://utsbuildpros.com/blog/certified-steel-building-contractor-texas-credentials) More Articles - What a 30x40, 40x60 and 50x100 Metal Building Costs in Texas (2026) - Certified Steel Building Contractors in Texas: What MBCI SSR, NASCLA, PMP and ISNetworld Actually Mean - Building an Aircraft Hangar: Why the Slab and the Door Decide the Job [View All Articles](https://utsbuildpros.com/blog) We Serve Your Area [Dallas, TX](https://utsbuildpros.com/locations/dallas)[Richardson, TX](https://utsbuildpros.com/locations/richardson)[Fort Worth, TX](https://utsbuildpros.com/locations/fort-worth)[Plano, TX](https://utsbuildpros.com/locations/plano)[Houston, TX](https://utsbuildpros.com/locations/houston)[Waco, TX](https://utsbuildpros.com/locations/waco)[Tyler, TX](https://utsbuildpros.com/locations/tyler)[Abilene, TX](https://utsbuildpros.com/locations/abilene)[Oklahoma City, OK](https://utsbuildpros.com/locations/oklahoma-city) [All Service Areas](https://utsbuildpros.com/service-areas) --- UTS BuildPros — veteran-owned general contractor, 740 E Campbell Rd Ste 300, Richardson, TX 75081. Phone (940) 231-2640. Serving Texas, Oklahoma and Arkansas since 2007.