# Solar O&M, Hangar & Receivership Contractor | UTS **URL:** https://utsbuildpros.com/capabilities **Summary:** Specialty capabilities of UTS BuildPros: four solar EPC O&M facilities delivered, authorized Ceco builder for hangars, and receivership renovation in DFW. **Overview:** UTS BuildPros, a general contractor in Richardson, Texas, has three specialty capabilities. Solar EPC O&M and remote-site energy buildings: four operations and maintenance facilities delivered for WHC Energy Services (Greater Bryant Solar, Delaware Ranch Solar, a Hyundai project in Hillsboro and Chevron's SunRoper project in Houston), two more in progress, under IRA prevailing wage with certified payrolls. Aircraft hangars: an authorized Ceco Building Systems builder whose project managers and estimator completed Ceco Builder School, with an MBCI-certified standing seam roof installer; no hangar has been completed yet. Receivership and distressed multifamily renovation: required renovations that bring units to a livable standard, including Landmark on the Valley in Dallas-Fort Worth, as an EPA Lead-Safe Certified Firm. Published prequalification: EMR 0.81 (2026), ISNetworld A, Avetta, bonding to $10 million per project and $25 million aggregate, BBB A+. --- Specialty Capabilities # Solar O&M Facilities, Aircraft Hangars and Receivership Renovation Most metal-building contractors can frame a box. Fewer have delivered a staffed operations building on a remote solar site, prepared to build a hangar under a manufacturer program, and brought a distressed apartment community back to a livable standard. This page sets out what UTS BuildPros has delivered in each, what backs it, and the question you should ask any contractor you are comparing, including us. ## What We Have Delivered, and How to Check It Every project below is named so that you can verify it. Where we have not finished a job of that type yet, the table says so. UTS BuildPros specialty capabilities: delivered work, credentials, and the question to ask any contractor Specialty What we have delivered What backs it What to ask any contractor Solar EPC O&M and remote-site energy buildings[Solar EPC O&M facilities →](https://utsbuildpros.com/services/metal-buildings/energy-om-facilities) Four operations and maintenance facilities delivered for WHC Energy Services: Greater Bryant Solar (Midland County), Delaware Ranch Solar (Culberson County), a Hyundai project (Hillsboro) and Chevron's SunRoper project (Houston). Two more O&M facilities are in progress. IRA prevailing wage and apprenticeship with certified payrolls and registered apprentices. Louisiana commercial license CL.13232. Bonding to $10,000,000 per project. How many O&M buildings have you delivered on remote sites, under certified payroll, and will the EPC take a reference call? Aircraft hangars[How we approach a hangar →](https://utsbuildpros.com/blog/aircraft-hangar-metal-building-slab-door-texas) No hangar completed yet. We are an authorized Ceco Building Systems builder, and our project managers and estimator completed Ceco Builder School in Norman, Oklahoma. Our Division President holds MBCI's standing seam roof installer certification and completed two ACI University concrete certificate programs. The hangar slab is engineered from the heaviest aircraft's wheel loads. Who engineers the slab for your aircraft's wheel loads, and which door system loads the frame rather than the slab? Receivership and distressed multifamily renovation[Receivership renovation →](https://utsbuildpros.com/services/multifamily-renovations/receivership) Required renovations that bring occupied units back to a livable standard, including Landmark on the Valley in Dallas-Fort Worth. EPA Lead-Safe Certified Firm (NAT-F268417-1) and EPA lead-based paint activities firm (LBP-F268417-1). Written condition assessments and line-item scopes structured for court and servicer reporting. Will your scope and progress reports stand up in a receiver's report to the court, and are you an EPA lead-safe certified firm? Municipal and public-sector buildings[Public-sector construction →](https://utsbuildpros.com/services/commercial-construction/public-sector) A 5,000 square foot pre-engineered steel maintenance building for the City of Hugo, Oklahoma. ISNetworld A grade, Avetta, a published EMR and written safety programs on file. What is your EMR for each of the last three years, and is it published or only available on request? ## Prequalification Facts, Published The numbers a procurement team asks for, stated here so that you do not have to request them. EMR (NCCI) 0.81 for 2026, 0.59 for 2025, 0.70 for 2024 Bonding $10,000,000 single project; $25,000,000+ aggregate Prequalification ISNetworld A grade; Avetta Manufacturer Authorized Ceco Building Systems builder Roof systems MBCI certified standing seam roof installer (Division President) Reputation BBB A+ accredited; Google 4.8 from 18 reviews Delivery model General contractor; every trade performed by prequalified licensed subcontractors under one project manager ## Common Questions Who builds solar O&M buildings for EPC contractors in Texas? UTS BuildPros builds operations and maintenance facilities on utility-scale solar sites for EPCs. It has delivered four for WHC Energy Services, at Greater Bryant Solar in Midland County, Delaware Ranch Solar in Culberson County, a Hyundai project in Hillsboro and Chevron's SunRoper project in Houston, with two more in progress. The work runs under IRA prevailing wage and apprenticeship with certified payrolls. These are the same buildings described on our remote-site energy page: one program, counted once. Can UTS BuildPros build an aircraft hangar? Yes. UTS BuildPros is an authorized Ceco Building Systems builder, its project managers and estimator completed Ceco Builder School, and its Division President holds MBCI's standing seam roof installer certification. We have not completed a hangar yet, and we say so. A clear-span hangar is simpler to frame than the SCADA-equipped O&M buildings we deliver; what decides a hangar is the slab under the aircraft and the door it rolls through, and both are engineered before steel is ordered. Who handles receivership apartment renovations in Dallas-Fort Worth? UTS BuildPros renovates multifamily properties in receivership, special servicing and REO, bringing units back to a livable standard while residents stay in place. Landmark on the Valley in Dallas-Fort Worth is one of those projects. We produce condition assessments and line-item scopes structured for court and servicer reporting, and we are an EPA Lead-Safe Certified Firm for the older properties these assignments usually involve. What should I check before hiring a metal building contractor? Ask for delivered projects of the same type with a reference you can call, not renderings. Ask for the contractor's EMR for each of the last three years, its single-project and aggregate bonding limits, and its prequalification grades such as ISNetworld. Ask which manufacturer it is an authorized builder for, and who is certified to install the roof system, because some weathertightness warranties require a certified installer. UTS BuildPros publishes all of these on this page. Does UTS BuildPros self-perform the trades? No. UTS BuildPros is a general contractor. Every trade is performed by subcontractors prequalified for safety record, licensing and insurance under our Subcontractor Safety Management program, run by one BuildPros project manager. That is how the same standard holds from the first site of a program to the last. Where does UTS BuildPros work? UTS BuildPros is headquartered in Richardson, Texas, builds statewide in Texas, works in Oklahoma, and holds Louisiana commercial license CL.13232. In Arkansas it holds a residential builder license only; commercial license coverage in Arkansas and Alabama can be added for a program on request. ## Tell Us About the Project An O&M program, a hangar or a property in receivership: send what you have, and a BuildPros project manager replies with the next step. 1 2 Service & Location Contact Details Service Needed * Select a service... Commercial Construction Multifamily Renovation Metal Building Solar EPC / O&M Facility Other City or Project Location * Approximate size or scope (optional) When do you need it done? (optional) Select a timeline... ASAP — under 1 month 1–3 months 3–6 months 6–12 months Still planning — no date yet Continue Name * Phone * Email * Project Details (optional) Photos, Plans & Documents (optional) Choose files or drag them here Photos, PDFs, plans, spreadsheets or CAD drawings — up to 25.0 MB each, 10 files max. Site photos and a plan set get you a far more accurate number. Website Back We reply within 1 business day Send My Project We reply within 1 business day Send My Project Prefer to talk? [Call (940) 231-2640](tel:+19402312640) --- UTS BuildPros — veteran-owned general contractor, 740 E Campbell Rd Ste 300, Richardson, TX 75081. Phone (940) 231-2640. Serving Texas, Oklahoma and Arkansas since 2007.