# Metal Building Contractor Midland TX | UTS **URL:** https://utsbuildpros.com/locations/midland/metal-buildings **Summary:** Steel and metal building construction in Midland, TX. Midland County permitting, adopted code, foundation engineering and turnkey erection. **Overview:** UTS BuildPros is a veteran-owned general contractor that designs, permits and erects metal and steel buildings in Midland, Texas (Midland County). Permits are issued by the City of Midland through its Code Administration Division, which handles plan review for commercial work. Midland requires a contractor to be licensed, bonded and registered with the city before a permit will be issued — a prerequisite rather than a formality, and one that adds days for an out-of-town builder who leaves it to the end. Sites outside the city limits are reviewed by Midland County. Confirm the current adopted edition with the City of Midland before design. Midland's adoption history runs behind the metros — it has operated on materially older editions than Dallas or Austin — and the city's own Building Codes page is the authoritative source rather than any summary, including this one. Two things drive Permian design. Wind exposure is the first: these are open, flat, unobstructed sites, and exposure category frequently governs more than the wind speed itself, which is determined site-specifically under ASCE 7. The second is that these buildings are rarely empty shells. An O M or control building carries conditioned space, instrumentation, power quality requirements and often a restroom on a site with no municipal water or sewer — so the mechanical, electrical and civil scope is a larger share of the number here than on a comparable shop elsewhere. Common Midland building types include operations and maintenance facilities, control and scada buildings, maintenance and equipment bays. The firm is BBB A+ accredited, ISNetworld verified and OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Code and permitting details on this page were verified 2026-09-07. --- Midland County · Texas # Metal Building Contractor in Midland Veteran-owned steel building construction in Midland, TX — design, engineering, permitting, foundation and erection under one contract. [Get Your Free Quote](https://utsbuildpros.com/quote)[(940) 231-2640](tel:+19402312640) Typical turnkey cost $60–$150 per sq ft, turnkey That is the all-in range: foundation, erection, insulation, electrical, doors and permitting. Shell-only advertisements quote $22–$40 per sq ft for the steel alone, and the finished building typically lands three to four times that — which is where most first-time budgets go wrong. Your number depends on size, site and finish level, and we quote it line by line. ## What We Build in Midland Midland demand is energy, and it is not the shop-and-storage work that drives most Texas metal building markets. What gets asked for here are operations and maintenance facilities, control and SCADA buildings, equipment and maintenance bays, and service structures for oilfield and renewable operators — buildings that have to house instrumentation and staff on remote sites, not just cover equipment. The Permian s solar buildout has added a second stream of the same requirement. Midland is roughly five hours from our Richardson office. We work the Permian regularly and mobilize on a project basis, with the travel cost stated as its own line rather than folded into the square-foot rate. ### What we build in Midland - Operations and maintenance facilities - Control and SCADA buildings - Maintenance and equipment bays - Oilfield service and support structures - Solar and renewable site facilities Completed in the Permian ## One O&M Floor Plan, Built Across the Permian Built for WHC Energy Services on a Chevron project south of Midland — not a shell, but a working facility housing control instrumentation and staff on a remote site. The same floor plan has since gone up at two locations in Culberson County for the Delaware Ranch Solar project and at Greater Bryant G Solar here in Midland County. Four sites, multiple operators, one design: the repeatability is the point, because a second building that matches the first is a different promise from a second building that merely resembles it. - Full SCADA room - Two offices - Restroom - Maintenance bays - Standing-seam roof - Separate pump house for water - Caliche pad and site work - Culberson County — Delaware Ranch Solar - Midland County — exterior underway - Interior fit-out, same floor plan ## Permitting & Code in Midland ### Who issues the permit Permits are issued by the City of Midland through its Code Administration Division, which handles plan review for commercial work. Midland requires a contractor to be licensed, bonded and registered with the city before a permit will be issued — a prerequisite rather than a formality, and one that adds days for an out-of-town builder who leaves it to the end. Sites outside the city limits are reviewed by Midland County. ### Which code applies Confirm the current adopted edition with the City of Midland before design. Midland s adoption history runs behind the metros — it has operated on materially older editions than Dallas or Austin — and the city s own Building Codes page is the authoritative source rather than any summary, including this one. ### What drives the engineering Two things drive Permian design. Wind exposure is the first: these are open, flat, unobstructed sites, and exposure category frequently governs more than the wind speed itself, which is determined site-specifically under ASCE 7. The second is that these buildings are rarely empty shells. An O&M or control building carries conditioned space, instrumentation, power quality requirements and often a restroom on a site with no municipal water or sewer — so the mechanical, electrical and civil scope is a larger share of the number here than on a comparable shop elsewhere. Code and permitting details verified 2026-09-07 against [City of Midland — Building Codes](https://www.midlandtexas.gov/1268/Building-Codes). Adopted editions change — confirm current requirements with the authority before relying on this for design. ## Midland Metal Building Questions Does UTS BuildPros build in the Permian Basin? Yes. We built an operations and maintenance facility south of Midland for WHC Energy Services on a Chevron project, containing a full SCADA room, two offices, a restroom and maintenance bays. We have also delivered facilities at two locations in Culberson County for the Delaware Ranch Solar project, and a further facility for the Greater Bryant G Solar project in Midland County. Do I need to register as a contractor to build in Midland? Your contractor does. The City of Midland requires a contractor to be licensed, bonded and registered with the city before a commercial permit will be issued. It is routine but it is a prerequisite, and leaving it until the permit application is ready is a common way for an out-of-town builder to lose several days. Sites outside the city limits fall to Midland County instead. What makes an O&M or control building different from a standard metal shop? The shell is the smallest part of it. An operations and maintenance building carries conditioned space, instrumentation, power quality requirements, and frequently a restroom on a site with no municipal water or sewer. The mechanical, electrical and civil scope is a much larger share of the cost than on a comparable storage or shop building, and a square-foot rate borrowed from one will not price the other. What building code applies in Midland? Confirm the current adopted edition with the City of Midland before design. Midland s adoption history runs behind the major metros and has sat on materially older editions than Dallas or Austin, so an assumption carried from a DFW project is unsafe here. The city s Building Codes page is the authoritative source. ## Metal buildings in other cities [Dallas](https://utsbuildpros.com/locations/dallas/metal-buildings)[Richardson](https://utsbuildpros.com/locations/richardson/metal-buildings)[Plano](https://utsbuildpros.com/locations/plano/metal-buildings)[Houston](https://utsbuildpros.com/locations/houston/metal-buildings)[Austin](https://utsbuildpros.com/locations/austin/metal-buildings)[San Antonio](https://utsbuildpros.com/locations/san-antonio/metal-buildings)[Oklahoma City](https://utsbuildpros.com/locations/oklahoma-city/metal-buildings)[All metal building services](https://utsbuildpros.com/services/metal-buildings) ## Pricing a Metal Building in Midland? Tell us the size, the use and the site. You get a line-item estimate that separates the building, the foundation, the site work and the permitting, so you can see what you are actually paying for. [Get Your Free Quote](https://utsbuildpros.com/quote)[(940) 231-2640](tel:+19402312640) --- UTS BuildPros — veteran-owned general contractor, 740 E Campbell Rd Ste 300, Richardson, TX 75081. Phone (940) 231-2640. Serving Texas, Oklahoma and Arkansas since 2007.