# Metal Building Contractor Richardson TX | UTS **URL:** https://utsbuildpros.com/locations/richardson/metal-buildings **Summary:** Steel and metal building construction in Richardson, TX. Dallas Collin Counties permitting, adopted code, foundation engineering and turnkey erection. **Overview:** UTS BuildPros is a veteran-owned general contractor that designs, permits and erects metal and steel buildings in Richardson, Texas (Dallas Collin Counties). Permits are issued by the City of Richardson Building Inspection department at 2360 Campbell Creek Blvd, Suite 550. Richardson requires contractor registration with the city before a permit will issue — a step that catches out-of-town builders and adds days if it is left to the end. Commercial permit types are handled separately, including Certificate of Occupancy, interior finish and new construction. Richardson has adopted the 2021 International Codes and the 2020 National Electrical Code. Because the city sits in both Dallas and Collin counties, confirm which county a site falls in for anything the county rather than the city administers. Richardson sits on the same North Texas expansive clay as the rest of the metroplex, so a geotechnical report drives the foundation rather than a rule of thumb. The practical local difference is procedural rather than structural: contractor registration is a prerequisite to permit issue, and city plan review expects a complete commercial set rather than a partial one. Common Richardson building types include service and flex buildings, contractor and trade shops, small commercial storefronts. The firm is BBB A+ accredited, ISNetworld verified and OSHA 30-Hour trained, has built in Texas, Oklahoma and Arkansas since 2007, and is reached at (940) 231-2640. Code and permitting details on this page were verified 2026-09-07. --- Dallas & Collin Counties · Texas # Metal Building Contractor in Richardson Veteran-owned steel building construction in Richardson, TX — design, engineering, permitting, foundation and erection under one contract. [Get Your Free Quote](https://utsbuildpros.com/quote)[(940) 231-2640](tel:+19402312640) Typical turnkey cost $60–$150 per sq ft, turnkey That is the all-in range: foundation, erection, insulation, electrical, doors and permitting. Shell-only advertisements quote $22–$40 per sq ft for the steel alone, and the finished building typically lands three to four times that — which is where most first-time budgets go wrong. Your number depends on size, site and finish level, and we quote it line by line. ## What We Build in Richardson Richardson s steel demand is light-commercial rather than heavy: service and flex buildings along the Central Expressway and Plano Road corridors, contractor and trade shops, and small commercial storefronts. The Telecom Corridor s office density means much of the work is support and service space behind the corporate frontage rather than the frontage itself. Richardson is our home city. Our office is at 740 E Campbell Rd, so a Richardson project is not a drive at all — no mobilization, no per diem, and a superintendent who can be on site within minutes rather than hours. ### What we build in Richardson - Service and flex buildings - Contractor and trade shops - Small commercial storefronts - Equipment and vehicle storage - Light industrial space ## Permitting & Code in Richardson ### Who issues the permit Permits are issued by the City of Richardson Building Inspection department at 2360 Campbell Creek Blvd, Suite 550. Richardson requires contractor registration with the city before a permit will issue — a step that catches out-of-town builders and adds days if it is left to the end. Commercial permit types are handled separately, including Certificate of Occupancy, interior finish and new construction. ### Which code applies Richardson has adopted the 2021 International Codes and the 2020 National Electrical Code. Because the city sits in both Dallas and Collin counties, confirm which county a site falls in for anything the county rather than the city administers. ### What drives the engineering Richardson sits on the same North Texas expansive clay as the rest of the metroplex, so a geotechnical report drives the foundation rather than a rule of thumb. The practical local difference is procedural rather than structural: contractor registration is a prerequisite to permit issue, and city plan review expects a complete commercial set rather than a partial one. Code and permitting details verified 2026-09-07 against [City of Richardson — Codes & Ordinances](https://www.cor.net/departments/building-inspection/system-pages-do-not-delete/codes-ordinances). Adopted editions change — confirm current requirements with the authority before relying on this for design. ## Richardson Metal Building Questions Do I need to register as a contractor to build in Richardson? Your contractor does. The City of Richardson requires contractor registration with the city before a permit will be issued for any work inside the city limits. It is a routine step, but it is a prerequisite rather than a formality, and leaving it until the permit application is ready is a common way to lose several days. We are registered in Richardson — it is our home city. What building code applies to a metal building in Richardson? Richardson has adopted the 2021 International Codes and the 2020 National Electrical Code. The city spans both Dallas and Collin counties, so for anything administered at county rather than city level, confirm which county your site actually falls in. Is UTS BuildPros based in Richardson? Yes. Our office is at 740 E Campbell Rd, Ste 300, Richardson, TX 75081. Richardson work carries no mobilization cost or per diem of any kind, and a superintendent can be on a Richardson site within minutes. ## Metal buildings in other cities [Dallas](https://utsbuildpros.com/locations/dallas/metal-buildings)[Midland](https://utsbuildpros.com/locations/midland/metal-buildings)[Plano](https://utsbuildpros.com/locations/plano/metal-buildings)[Houston](https://utsbuildpros.com/locations/houston/metal-buildings)[Austin](https://utsbuildpros.com/locations/austin/metal-buildings)[San Antonio](https://utsbuildpros.com/locations/san-antonio/metal-buildings)[Oklahoma City](https://utsbuildpros.com/locations/oklahoma-city/metal-buildings)[All metal building services](https://utsbuildpros.com/services/metal-buildings) ## Pricing a Metal Building in Richardson? Tell us the size, the use and the site. You get a line-item estimate that separates the building, the foundation, the site work and the permitting, so you can see what you are actually paying for. [Get Your Free Quote](https://utsbuildpros.com/quote)[(940) 231-2640](tel:+19402312640) --- UTS BuildPros — veteran-owned general contractor, 740 E Campbell Rd Ste 300, Richardson, TX 75081. Phone (940) 231-2640. Serving Texas, Oklahoma and Arkansas since 2007.