# 40x60 Metal Building Cost in Texas | UTS
**URL:** https://utsbuildpros.com/metal-buildings/40x60
**Summary:** 40x60 metal building (2,400 sq ft): shell $53,000–$96,000, turnkey $156,000–$252,000. Eave heights, doors, slab specs.
**Overview:** A 40x60 metal building is 2,400 square feet of clear-span space. In Texas the installed shell costs $53,000–$96,000 and a turnkey shop or garage costs $156,000–$252,000 (2026 pricing). Built by UTS BuildPros, a veteran-owned general contractor in Richardson, Texas serving Texas, Oklahoma and Arkansas.
---
2,400 sq ft · clear span · Texas, Oklahoma & Arkansas

# 40x60 Metal Building Cost & Specs

2,400 square feet — the workhorse size for contractors, serious hobbyists and small businesses. Twice the area of a 30x40 for well under twice the cost.

[Get a 40 x 60 Quote](https://utsbuildpros.com/quote)[Call (940) 231-2640](tel:+19402312640)

## What a 40 x 60 Costs in Texas

2,400 square feet at 2026 North Texas pricing. Ranges reflect eave height, wind rating, door configuration and how much of the interior is finished.

 Scope Per sq ft 40 x 60 total

 Shell, installed $ 22 –$ 40 $53,000 – $96,000

 Turnkey shop or garage most common $ 65 –$ 105 $156,000 – $252,000

 Finished commercial $ 85 –$ 155 $204,000 – $372,000

Shell includes

Engineered foundation, the pre-engineered steel frame and panels, erection, and a standard roll-up door. Shell is the scope those bargain “steel building from $25,000” adverts are quoting — steel delivered and stood up, and nothing else.

Turnkey adds

Insulation, interior framing, electrical rough-in, HVAC where specified, overhead and walk doors, permits, and finish-out. A building you can actually use on handover.

Pricing basis: completed UTS BuildPros projects across DFW and North Texas, 2025–2026. Updated August 2026.

## What People Build at 40 x 60

- Contractor shop with equipment bays and material storage
- Small manufacturing or fabrication space
- Multi-vehicle shop with lift bays
- Agricultural equipment storage and repair
- Shop with a finished office and restroom

### Worth thinking about

This is where cost per square foot bottoms out for most buyers. The frame is efficient at 40 feet, the erection crew is on site the same number of days as a smaller building, and the added area is nearly all usable. If you are choosing between 30x40 and 40x60, compare total cost rather than size — the gap is usually smaller than people expect.

Eave heights

14 ft · 16 ft · 18 ft

Eave height costs little at build time and cannot be changed afterwards.

Typical doors

Typically two to three 12x14 overhead doors, often with one 14x16 for taller equipment. At 60 feet of length there is room for doors on both gable ends for drive-through access.

Slab & foundation

5-inch slab at 3,500 psi is the common specification, with thickened footings under frame columns. Drive-through use or loaded trailers justify 6 inches in the traffic lanes.

## Configure Your 40 x 60 in 3D

Set dimensions, eave height, doors and colours, and send the finished design straight to us for a quote. No sign-up, no download, no sales call. [Open the 3D Designer](https://utsbuildpros.com/3d-metal-building-designer)

## 40 x 60 Questions, Answered

 How much does a 40x60 metal building cost in Texas?

A 40x60 shell runs roughly $53,000–$96,000 installed. Turnkey — slab, erection, insulation, electrical, overhead doors and finish — typically lands between $156,000 and $252,000. Used as a finished commercial space the range moves to $204,000–$372,000.

 What eave height should I choose for a 40x60?

14 feet handles most shop use and standard equipment. Go to 16 if you want a two-post lift with a truck raised, or plan to stack racking. 18 feet is worth it for RV storage or if a boom lift needs to operate inside. Eave height is inexpensive at build time and impossible to change later.

 Is a 40x60 clear span?

Yes. A 40-foot width is comfortably clear span with no interior columns, leaving all 2,400 square feet usable and letting you reconfigure the layout later without working around posts.

 Can a 40x60 be used as a commercial building?

Often, yes — it is a common footprint for service shops, small warehouses and flex space. Commercial use brings ADA requirements, occupancy-rated exits, fire separation and usually a heavier electrical service, which is why finished commercial pricing runs above turnkey shop pricing.

## Compare Other Sizes

[24 x 30 720 sq ft](https://utsbuildpros.com/metal-buildings/24x30)[30 x 40 1,200 sq ft](https://utsbuildpros.com/metal-buildings/30x40)[30 x 50 1,500 sq ft](https://utsbuildpros.com/metal-buildings/30x50)[35 x 40 1,400 sq ft](https://utsbuildpros.com/metal-buildings/35x40)[50 x 80 4,000 sq ft](https://utsbuildpros.com/metal-buildings/50x80)[60 x 40 2,400 sq ft](https://utsbuildpros.com/metal-buildings/60x40)

## Ready to Price Your 40 x 60 ?

Tell us the eave height, doors and where it is going. Detailed budget range and timeline back within one business day.

[Get Your Free Quote](https://utsbuildpros.com/quote)[Call (940) 231-2640](tel:+19402312640)
---
UTS BuildPros — veteran-owned general contractor, 740 E Campbell Rd Ste 300, Richardson, TX 75081. Phone (940) 231-2640. Serving Texas, Oklahoma and Arkansas since 2007.