# 60x100 Metal Building Cost in Texas | UTS
**URL:** https://utsbuildpros.com/metal-buildings/60x100
**Summary:** 60x100 metal building (6,000 sq ft): shell $132,000–$240,000, turnkey $510,000–$930,000. Eave heights, doors, slab specs.
**Overview:** A 60x100 metal building is 6,000 square feet of clear-span space. In Texas the installed shell costs $132,000–$240,000 and a finished commercial build costs $510,000–$930,000 (2026 pricing). Built by UTS BuildPros, a veteran-owned general contractor in Richardson, Texas serving Texas, Oklahoma and Arkansas.
---
6,000 sq ft · clear span · Texas, Oklahoma & Arkansas

# 60x100 Metal Building Cost & Specs

6,000 square feet of column-free space. Distribution, manufacturing and larger commercial facilities where circulation space and clear height matter as much as floor area.

[Get a 60 x 100 Quote](https://utsbuildpros.com/quote)[Call (940) 231-2640](tel:+19402312640)

## What a 60 x 100 Costs in Texas

6,000 square feet at 2026 North Texas pricing. Ranges reflect eave height, wind rating, door configuration and how much of the interior is finished.

 Scope Per sq ft 60 x 100 total

 Shell, installed $ 22 –$ 40 $132,000 – $240,000

 Turnkey shop or garage $ 65 –$ 105 $390,000 – $630,000

 Finished commercial most common $ 85 –$ 155 $510,000 – $930,000

Shell includes

Engineered foundation, the pre-engineered steel frame and panels, erection, and a standard roll-up door. Shell is the scope those bargain “steel building from $25,000” adverts are quoting — steel delivered and stood up, and nothing else.

Turnkey adds

Insulation, interior framing, electrical rough-in, HVAC where specified, overhead and walk doors, permits, and finish-out. A building you can actually use on handover.

Pricing basis: completed UTS BuildPros projects across DFW and North Texas, 2025–2026. Updated August 2026.

## What People Build at 60 x 100

- Distribution and fulfilment
- Manufacturing with production lines
- Truck and heavy equipment service
- Multi-tenant flex-industrial
- Indoor equipment sales and display

### Worth thinking about

At 6,000 sq ft the building is usually the smaller part of the project. Site work, fire protection, a heavier electrical service, dock equipment and parking often approach or exceed the structure cost. An early budget that only prices the building will be badly wrong.

Eave heights

18 ft · 20 ft · 24 ft

Eave height costs little at build time and cannot be changed afterwards.

Typical doors

Multiple 14x16 or larger overhead doors, typically including dock positions. The 60-foot width supports comfortable forklift circulation between racking runs.

Slab & foundation

6-inch minimum at 4,000 psi, often 7–8 inches in dock and traffic areas. Slab design at this size should follow the equipment plan, not the other way round.

## Configure Your 60 x 100 in 3D

Set dimensions, eave height, doors and colours, and send the finished design straight to us for a quote. No sign-up, no download, no sales call. [Open the 3D Designer](https://utsbuildpros.com/3d-metal-building-designer)

## 60 x 100 Questions, Answered

 How much does a 60x100 metal building cost in Texas?

A 60x100 shell runs roughly $132,000–$240,000 installed. As a finished commercial facility, expect $510,000–$930,000 depending on office build-out, dock equipment, HVAC and fire protection requirements.

 What else should I budget for beyond the building?

Site work and grading, paving and parking, utility extensions, fire protection if required, dock levellers and seals, exterior lighting, landscaping where code requires it, and permitting and design fees. On a project this size these frequently total as much as the structure.

 Can a 60x100 be expanded later?

Yes, and this is a genuine advantage of pre-engineered steel. Extending along the length by bolting on additional bays typically costs 40–50% less per square foot than new construction, and the existing building stays in operation during the work. Tell us at design stage so the end wall is built as an expandable frame.

## Compare Other Sizes

[24 x 30 720 sq ft](https://utsbuildpros.com/metal-buildings/24x30)[30 x 40 1,200 sq ft](https://utsbuildpros.com/metal-buildings/30x40)[30 x 50 1,500 sq ft](https://utsbuildpros.com/metal-buildings/30x50)[35 x 40 1,400 sq ft](https://utsbuildpros.com/metal-buildings/35x40)[40 x 60 2,400 sq ft](https://utsbuildpros.com/metal-buildings/40x60)[50 x 80 4,000 sq ft](https://utsbuildpros.com/metal-buildings/50x80)

## Ready to Price Your 60 x 100 ?

Tell us the eave height, doors and where it is going. Detailed budget range and timeline back within one business day.

[Get Your Free Quote](https://utsbuildpros.com/quote)[Call (940) 231-2640](tel:+19402312640)
---
UTS BuildPros — veteran-owned general contractor, 740 E Campbell Rd Ste 300, Richardson, TX 75081. Phone (940) 231-2640. Serving Texas, Oklahoma and Arkansas since 2007.