# 60x40 Metal Building Cost in Texas | UTS
**URL:** https://utsbuildpros.com/metal-buildings/60x40
**Summary:** 60x40 metal building (2,400 sq ft): shell $53,000–$96,000, turnkey $156,000–$252,000. Eave heights, doors, slab specs.
**Overview:** A 60x40 metal building is 2,400 square feet of clear-span space. In Texas the installed shell costs $53,000–$96,000 and a turnkey shop or garage costs $156,000–$252,000 (2026 pricing). Built by UTS BuildPros, a veteran-owned general contractor in Richardson, Texas serving Texas, Oklahoma and Arkansas.
---
2,400 sq ft · clear span · Texas, Oklahoma & Arkansas

# 60x40 Metal Building Cost & Specs

2,400 square feet in a wide-and-shallow footprint. Same area as a 40x60, but the 60-foot width across the front suits sites with road frontage or where you want more doors facing out.

[Get a 60 x 40 Quote](https://utsbuildpros.com/quote)[Call (940) 231-2640](tel:+19402312640)

## What a 60 x 40 Costs in Texas

2,400 square feet at 2026 North Texas pricing. Ranges reflect eave height, wind rating, door configuration and how much of the interior is finished.

 Scope Per sq ft 60 x 40 total

 Shell, installed $ 22 –$ 40 $53,000 – $96,000

 Turnkey shop or garage most common $ 65 –$ 105 $156,000 – $252,000

 Finished commercial $ 85 –$ 155 $204,000 – $372,000

Shell includes

Engineered foundation, the pre-engineered steel frame and panels, erection, and a standard roll-up door. Shell is the scope those bargain “steel building from $25,000” adverts are quoting — steel delivered and stood up, and nothing else.

Turnkey adds

Insulation, interior framing, electrical rough-in, HVAC where specified, overhead and walk doors, permits, and finish-out. A building you can actually use on handover.

Pricing basis: completed UTS BuildPros projects across DFW and North Texas, 2025–2026. Updated August 2026.

## What People Build at 60 x 40

- Multi-bay shop with every bay accessible from the front
- Service business with vehicles pulled in side by side
- Equipment storage where everything needs front access
- Shop on a wide, shallow lot

### Worth thinking about

60x40 and 40x60 have identical area but behave differently. Choose 60x40 when access matters more than depth — several bays all reachable from the front. Choose 40x60 when you want depth for a work aisle or drive-through, and it will usually cost a little less because a 40-foot frame is more efficient than a 60-foot one.

Eave heights

14 ft · 16 ft · 18 ft

Eave height costs little at build time and cannot be changed afterwards.

Typical doors

The 60-foot frontage takes three or four overhead doors side by side — the main reason to choose this orientation over 40x60. Every bay gets its own door with no shuffling vehicles.

Slab & foundation

5-inch slab at 3,500 psi standard, with thickened footings under frame columns. The wider span carries slightly heavier column loads than a 40-foot width.

## Configure Your 60 x 40 in 3D

Set dimensions, eave height, doors and colours, and send the finished design straight to us for a quote. No sign-up, no download, no sales call. [Open the 3D Designer](https://utsbuildpros.com/3d-metal-building-designer)

## 60 x 40 Questions, Answered

 How much does a 60x40 metal building cost in Texas?

A 60x40 shell runs roughly $53,000–$96,000 installed, with turnkey typically between $156,000 and $252,000. Pricing is close to a 40x60 of the same area, usually slightly higher because the wider clear span needs heavier framing.

 Is 60x40 or 40x60 cheaper?

40x60 is usually marginally cheaper. Both enclose 2,400 square feet, but a 40-foot clear span uses lighter frames than a 60-foot span. If door access across the front is what you need, the difference is generally worth paying.

 Can I finance a 60x40 build?

Commonly, yes — through construction lending, an equipment or improvement loan, or in some cases a home equity product where the building sits on residential property. Tell us early if financing is involved, because lenders usually want a fixed-price contract and a defined draw schedule.

## Compare Other Sizes

[24 x 30 720 sq ft](https://utsbuildpros.com/metal-buildings/24x30)[30 x 40 1,200 sq ft](https://utsbuildpros.com/metal-buildings/30x40)[30 x 50 1,500 sq ft](https://utsbuildpros.com/metal-buildings/30x50)[35 x 40 1,400 sq ft](https://utsbuildpros.com/metal-buildings/35x40)[40 x 60 2,400 sq ft](https://utsbuildpros.com/metal-buildings/40x60)[50 x 80 4,000 sq ft](https://utsbuildpros.com/metal-buildings/50x80)

## Ready to Price Your 60 x 40 ?

Tell us the eave height, doors and where it is going. Detailed budget range and timeline back within one business day.

[Get Your Free Quote](https://utsbuildpros.com/quote)[Call (940) 231-2640](tel:+19402312640)
---
UTS BuildPros — veteran-owned general contractor, 740 E Campbell Rd Ste 300, Richardson, TX 75081. Phone (940) 231-2640. Serving Texas, Oklahoma and Arkansas since 2007.