Collin County · Texas

Metal Building Contractor in Plano

Veteran-owned steel building construction in Plano, TX — design, engineering, permitting, foundation and erection under one contract.

Typical turnkey cost

$60–$150

per sq ft, turnkey

That is the all-in range: foundation, erection, insulation, electrical, doors and permitting. Shell-only advertisements quote $22–$40 per sq ft for the steel alone, and the finished building typically lands three to four times that — which is where most first-time budgets go wrong. Your number depends on size, site and finish level, and we quote it line by line.

What We Build in Plano

Plano is a corporate and light-industrial market rather than a heavy one, and the metal building work reflects that. Requests here skew toward flex and office-warehouse shells along the Highway 121 and Central Expressway corridors, and toward the finish level a corporate tenant expects — insulated panel systems, conditioned space, and a facade that reads as a commercial building rather than a shop. Plano's development standards are stricter about appearance than most of the metro, which shapes the design before it shapes the budget.

Plano borders Richardson. Our office is roughly ten minutes from the Plano city line, which makes it the closest major market we serve and the one where a same-day site visit is easiest to arrange.

Permitting & Code in Plano

Who issues the permit

Permits are issued by the City of Plano Building Inspections department at the Municipal Center, 1520 Avenue K. Plano's development standards apply alongside the building code, and for a metal building the appearance and screening requirements are frequently the binding constraint rather than the structure.

Which code applies

Plano has adopted the 2021 International Building Code with City of Plano amendments. Collin County has separately adopted the 2021 International Fire Code with local amendments, which governs unincorporated Collin County sites.

What drives the engineering

Plano shares North Texas expansive clay, so the foundation logic is the same as Dallas: design from a geotechnical report, not from a rule of thumb. What differs is above the slab. Plano's appearance standards commonly push a steel building toward masonry wainscot, articulated facades and screened rooftop equipment, and those are design decisions best made before engineering rather than as a change order after a plan review comment.

Code and permitting details verified 2026-09-07 against City of Plano — Building Codes & Ordinances. Adopted editions change — confirm current requirements with the authority before relying on this for design.

Plano Metal Building Questions

Yes. The City of Plano Building Inspections department issues building permits from the Municipal Center at 1520 Avenue K. In Plano, plan review covers both the building code and the city's development and appearance standards, and for metal buildings the appearance requirements are often the harder of the two to satisfy. Sites in unincorporated Collin County are reviewed by the county instead.

Pricing a Metal Building in Plano?

Tell us the size, the use and the site. You get a line-item estimate that separates the building, the foundation, the site work and the permitting, so you can see what you are actually paying for.